Benefits:
|
- Turn the dial to adjust the temperature setting. Simple to use. Backlit display.
- On-demand backlighting makes it easy to read the display in a dark room or hallway.
- The temperature setting is held permanently in memory in the event of a power failure. No batteries required.
|
Description:
|
Simple to use. The temperature reading is easily seen from a distance. Backlit display. Turn the dial to adjust the setpoint temperature. Large easy-to-read display. On-demand backlighting makes it easy to read the display in a dark room or hallway. No batteries required. Powered through heating system controls. Easy installation and set up saves time and increases installer productivity. The setpoint temperature is held permanently in memory in the event of a power failure.Heat Only.
Easily configurable by the use of DIP switches.
Fahrenheit or Celsius temperature display for added flexibility.
Selectable heating cycle rates (1, 3, 6, 9 CPH) for a variety of applications.
Decorative cover plate is available to cover marks on the wall or to mount the T8775 Thermostat to an electrical box.
|
Honeywell T8775A The Digital, Easy-to-Read, Heat only, Round Non-Programmable Thermostat Features:
|
- Electrical Ratings:
- 24 Vac nominal: 18 Vac to 30 Vac, 60Hz.
- Heating: .02 to 1.5 A run; 3.5A inrush.
- Fan: .02 to 0.5 A run; 2.5A inrush.
- Heating Only
- Temperature Ratings:
- Setting Range:
- Ambient Range:
- 40°F to 90°F (4.5°C to 32.0°C) in heating.
- 40°F to 110°F (4.4°C to 43.3°C).
- Humidity Ratings: 5% to 90% RH, non-condensing.
- Mounting Hardware:
- Sheet metal screws: Two 1-in. (25 mm) 4-24, type AB.
- Drywall anchors: Two conical anchors, 3/16 in. (5 mm)
- diameter by ? in. (19 mm) length.
- Installation Instructions packed with resistor.
- 4074 FAB Resistor:
- 1 Kohm, 3 Watts.
- Batteries: Not required.
- Finish: Premier White®.
|
View the T8775A1009 Honeywell Thermostat Manual! 
